- LAMINATED GLASS LINE

- WASHERS: VERTICAL/HORIZONTAL/JUMBO

- CONVEYING AND TRANSPORT SYSTEM

 

TRANSFERING SECTION

LAMINATED GLASS LINE

 

OPERATING:

First glass, after washing and drying, comes to acceleration conveyor and then to squaring table, here glass panel is automatically ranged to two reference points on the corner of the glass (zero position); then it is picked by aerial conveyor, through suction cup system, and transferred on second table, in assembling zone. Second glass, after washing and drying, comes to squaring table, then it is ranged to reference points (zero position); after PVB laying on first panel and the start given by the worker, second glass is transferred on assembling table and it is coupled with the first glass along the same axis. Lamination of three or more glass sheets in the same glass sandwich (multilayer lamination).

FEATURES AND TECHNICAL DETAILS:

  • Acceleration and deceleration zone, with double motorization (two motoreducers and inverters) to increase productivity; at the washer exit, glass sheet change speed and accelerate to squaring zone (through syncronization and specific photocells).
  • Automatic squaring, picking and coupling of the glass, with accuracy up to a tenth of a millimetre, thanks to the mechanical stroke, which stops glass sheets always in the same position, and which starts up and stops the transfer always in the same position.
  • Glass squaring and centring is carried out by belt system and mechanical end-stroke, that gives to the transfer a zero position with two reference points, one vertical and one horizontal (corresponding to one of the corners of the glass, on the right or on the left side of the conveyor, according to customer needs).
  • Transfer with aerial structure, painted iron made, with suction cups (made by specific material that keeps clean glass, no marking, that doesn't ruin LOW E. or soft coated glass side) positioned in right way to work different sizes through easy regulation; the movement of the suction cup transfer is fast and precise, on horizontal thanks to special guides and runners that eliminate oscillation, on vertical thanks to lifting and falling system through motor and screws; suction cups are divided in three sets, that start or stop to work automatically through sensors, according to glass sizes.
  • Double centring, picking and coupling system to laminate at the same time two small glasses side by side; specific sensors control this double mechanical stroke centring system; suction cups transfer will pick at the same time the two glasses (already centred) and put them on assembling section with big accuracy; the centring, picking and coupling operation will be made more times according to the number of glass sheets that we want to laminate in the same glass sandwitch (multilayer lamination with two/ three/ four or more glass sheets); this system increase a lot the production of small glasses.
  • The transport rollers of are equipped with OR rings in material that does not leave marks on the glass surface.

 

 

LISEC COSTRUZIONE MACCHINE ITALIA S.R.L.

VIA AQUILEIA 14

31048 OLMI DI S. BIAGIO DI CALLALTA (TV)

ITALY

P. IVA 03289430260

TEL +39 0422 794111 FAX +39 0422 794191

E-mail info@liseccmi.com